Audio 2, 4, 6, or 8-channel configuration
Port
Light Blue
Lime
Pink
Orange
Black
Gray
9.
USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports
are available for connecting USB 2.0 devices.
10. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports
are available for connecting USB 2.0 devices.
11. Coaxial S/PDIF Out port. This port connects an external audio output device
via a coaxial S/PDIF cable.
12. USB 2.0 ports 5 and 6. These two 4-pin Universal Serial Bus (USB) ports
are available for connecting USB 2.0 devices.
13. PS/2 mouse port (purple). This port is for a PS/2 keyboard.
2.7.2
Internal connectors
1.
Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using a FDD cable with a covered Pin 5.
P5Q SE/R
2-24
Headset
4-channel
2-channel
Line In
Line In
Line Out
Front Speaker Out
Mic In
Mic In
–
–
Rear Speaker Out
–
Floppy Disk Drive Connector
6-channel
Line In
Front Speaker Out
Mic In
–
Center/Subwoofer
Rear Speaker Ou
–
FLOPPY
PIN1
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
8-channel
Line In
Front Speaker Out
Mic In
Center/Subwoofer
Rear Speaker Out
–
Side Speaker Out
Chapter 2: Hardware information