Drive Xpert - Asus P5Q PRO - Motherboard - ATX User Manual

3.8.2

Drive Xpert

Drive Xpert Control [Auto]
This item allow you to enabled or disabled the function of Drive Xpert Control.
Configuration options: [Auto] [Enabled] [Disabled]
Drive Xpert Mode Update [Current setting]
Set this item to [Mode change] to show further settings of the Drive Xpert feature.
Configuration options: [Current setting] [Mode change]
Update To Super Speed [Press Enter]
This item appears only when the Drive Xpert Mode Update item is set to
[Mode change] and allows you to use Super Speed function. Plug two
identical SATA hard drives in the SATA_E1 (orange, port 0) and SATA_E2
(white, port 1) connectors on the motherboard and press the <Enter> key.
Update To EZ Backup [Press Enter]
This item appears only when the Drive Xpert Mode Update item is set to
[Mode change] and allows you to use EZ Backup function. Plug two identical
SATA hard drives in the SATA_E1 (orange, port 0) and SATA_E2 (white, port
1) connectors on the motherboard and press the <Enter> key.
Make necessary backup before using the Drive Xpert function:
•
•
Update To Normal Mode [Press Enter]
This item appears only when the Drive Xpert Mode Update item is set to
[Mode change] and allows you to use the SATA_E1 (orange, port 0) and
SATA_E2 (white, port 1) connectors as normal SATA connectors.
3-40
All original data of the hard drive connected to the SATA_E2 (white, port 1)
connector on the motherboard will be erased for EZ Backup setup
All original data of the two hard drives will be erased for Super Speed
setup.
Chapter 3: BIOS setup