Asus P5ND2-SLI Deluxe Manual page 100

Spread Spectrum Control Spread Spectrum Control Spread Spectrum Control
Spread Spectrum Control Spread Spectrum Control
This sub-menu allows you to set the CPU, PCI Express, Serial ATA, and
Lightning Data Transport (LDT) clock generator spread spectrum. The
spread spectrum is used to dynamically change the system frequency to
minimize problems with electromagnetic interference (EMI). Set the
O v e r c l o c k P r o f i l e O v e r c l o c k P r o f i l e
O v e r c l o c k P r o f i l e O v e r c l o c k P r o f i l e O v e r c l o c k P r o f i l e to [Manual], if you want to configure this item.
Advanced
CPU Spread Spectrum
PCIE Spread Spectrum
SATA Spread Spectrum
LDT Spread Spectrum
F1:Help
ESC: Exit
CPU Spread Spectrum [Center Spread]
Disables or sets the CPU clock generator spread spectrum. The default
setting [Center Spread] allows a dynamic CPU frequency change of
-0.25% to +0.25%. The [Down Spread] setting allows a dynamic CPU
frequency change of -0.5% to 0.0%. Setting to [0.5%++ Spread]
allows dynamic frequency changes from -0.5% to +0.5%.
Configuration options: [Disabled] [Center Spread] [Down Spread]
[0.5%++ Spread]
PCIE Spread Spectrum [Down Spread]
Disables or sets the PCI Express clock generator spread spectrum. The
default setting [Down Spread] allows a dynamic PCI Express frequency
change of -0.5% to 0.0%.
Configuration options: [Disabled] [Down Spread]
SATA Spread Spectrum [Down Spread]
Disables or sets the Serial ATA clock generator spread spectrum. The
default setting [Down Spread] allows a dynamic Serial ATA frequency
change of -0.5% to 0.0%.
Configuration options: [Disabled] [Down Spread]
4 - 2 4 4 - 2 4 4 - 2 4 4 - 2 4 4 - 2 4
Phoenix-Award BIOS CMOS Setup Utility
Spread Spectrum Control
[Center
[Down Spread]
[Down Spread]
[Center Spread]
: Select Item -/+: Change Value
: Select Menu Enter: Select Sub-menu
Spread]
Item Specific Help
Press [Enter] to set.
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
Select Menu
F5: Setup Defaults
F10: Save and Exit