Asus P5N32-SLI-Deluxe User Manual page 161

Creating a CONCATENATION set Creating a CONCATENATION set Creating a CONCATENATION set Creating a CONCATENATION set Creating a CONCATENATION set
To create a CONCATENATION set:
1. From the Silicon Image
configuration utility
main menu, select
C r e a t e R A I D s e t C r e a t e R A I D s e t C r e a t e R A I D s e t
C r e a t e R A I D s e t C r e a t e R A I D s e t
then press <Enter>.
2. From the sub-menu
Select
C O N C A T E N A T I O N C O N C A T E N A T I O N
C O N C A T E N A T I O N C O N C A T E N A T I O N C O N C A T E N A T I O N
then press <Enter>.
3. The selection bar moves to the
Physical Drive menu. Using the
up or down arrow keys, select a
drive then press <Enter>
to set a drive for the RAID set.
4. The utility prompts a message
to input the RAID size, use the
up or down arrow keys to set
the RAID size then press <Enter>.
5. Press <Y> to confirm or <N> to return to the Main Menu.
• Configure a CONCATENATION set when using a single Serial ATA
drive; otherwise, the system will not recognize the drive.
• You can also create a RAID set using the SATARAID5 GUI utility
under a Windows
A S U S P 5 N 3 2 - S L I D e l u x e A S U S P 5 N 3 2 - S L I D e l u x e
A S U S P 5 N 3 2 - S L I D e l u x e A S U S P 5 N 3 2 - S L I D e l u x e A S U S P 5 N 3 2 - S L I D e l u x e
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
PHYSICAL DRIVE
0 XXXXXXXXXXX
1 XXXXXXXXXXX
2 XXXXXXXXXXX
3 XXXXXXXXXXX
environment.
®
RAID0
RAID0
RAID1
RAID1
RAID10
RAID5
SPARE DRIVE
RAID10
SPARE DRIVE
CONCATENATION
XXXXXXMB
XXXXXXMB
XXXXXXMB
XXXXXXMB
5 - 4 1 5 - 4 1
5 - 4 1 5 - 4 1 5 - 4 1