Acpi 2.0 Support; Acpi Apic Support; Apm Configuration - Asus P5N32-SLI SE DELUXE User Manual

4.5.3 4.5.3 4.5.3 ACPI 2.0 Support [No] ACPI 2.0 Support [No] ACPI 2.0 Support [No]
4.5.3 4.5.3 ACPI 2.0 Support [No] ACPI 2.0 Support [No]
Allows you to add more tables for Advanced Configuration and Power
Interface (ACPI) 2.0 specifications. Configuration options: [No] [Yes]
4.5.4 4.5.4 ACPI APIC Support [Enabled] ACPI APIC Support [Enabled]
4.5.4 4.5.4 4.5.4 ACPI APIC Support [Enabled] ACPI APIC Support [Enabled] ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Advanced Programmable Interrupt
Controller (APIC). When set to Enabled, the ACPI APIC table pointer is
included in the RSDT pointer list. Configuration options: [Disabled]
[Enabled]
4.5.5 4.5.5

APM Configuration

APM Configuration
4.5.5 4.5.5 4.5.5 APM Configuration APM Configuration APM Configuration
Power Button Mode
Restore on AC Power Loss
Power On By PCI Devices
Power On By Onboard LAN
Power On By External Modems
Power On By PS/2 Keyboard
Power On By PS/2 Mouse
Power On By RTC Alarm
v02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
Power Button Mode [On/Off] Power Button Mode [On/Off] Power Button Mode [On/Off]
Power Button Mode [On/Off] Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Last State] Restore on AC Power Loss [Last State]
Restore on AC Power Loss [Last State] Restore on AC Power Loss [Last State] Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled] Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
A S U S P 5 N 3 2 - S L I S E D e l u x e A S U S P 5 N 3 2 - S L I S E D e l u x e A S U S P 5 N 3 2 - S L I S E D e l u x e A S U S P 5 N 3 2 - S L I S E D e l u x e A S U S P 5 N 3 2 - S L I S E D e l u x e
BIOS SETUP UTILITY
Power
[On/Off]
[Last State]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Go into On/Off or
Suspend when Power
button is pressed.
Select Screen
Select Item
+-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
4 - 3 3 4 - 3 3
4 - 3 3 4 - 3 3 4 - 3 3