Adding a New Group
Groups allow you to communicate simultaneously by
sending out a broadcast text message to every
member of a current group.
1.
Highlight
and press
2.
Press
(right softkey)
OPTIONS
a new Group category.
3.
Read the onscreen information and press
(left softkey).
4.
Add multiple entries (two or more) to your new
group by highlighting a name from the list and
pressing
. This action places a check mark
alongside the name.
Note
If several numbers are saved within a single Contacts
entry, you can select from these additional numbers
by using the left or right navigation keys.
5.
Press
(left softkey) and enter a name for
CONTINUE
the new group. (See "Entering Text" on page 30.)
6.
Press
SAVE
(left softkey) to assign the selected
entries to the new group.
> Contacts
.
to create
> New Group
START
Selecting a Ringer Type for an Entry
Assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See "Ringer
Types" on page 46.)
1.
Display a Contacts entry and press
softkey)
> Edit Contact
2.
Highlight the current ring type and press
display the Select Ringer menu.
3.
Select a ringer type, such as
,
Default Ringer
Downloaded Ringers
, or
.
Videos
No Ringer
4.
Scroll through available ringers. (To hear a sample
ringer, highlight a ringer type.)
5.
Highlight a ringer and press
6.
Press
DONE
(left softkey) to save the new ringer type.
OPTIONS
(right
.
Get New Ringers
,
,
Other Ringers
.
2E. Contacts
to
,
My
71