Device Mode [STD Printer Mode]
Allows you to set the mode of Printer Port.
Configuration options: [STD Printer Mode] [SPP Mode] [EPP-1.9 and
SPP Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and EPP 1.9
Mode] [ECP and EPP 1.7 Mode]
2.5
Chipset menu
The Advanced menu items allow you to change the advanced chipset
settings.
North Bridge
South Bridge
Legacy USB Configuration
2.5.1
North Bridge
Memory Information
Total Memory
Memory Slot0
Memory Slot2
DVMT Size
Boot Graphic Adapter Priority
DVMT Size [128M]
Allows you to select the DVMT size. This option is not functional when a
VGA card is installed. Configuration options: [Auto] [32M] [64M] [128M]
Boot Graphic Adapter Priority [PCIE->PCI->IGD]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [PCIE->PCI->IGD] [IGD->PCIE->PCI] [PCI->PCIE->IGD]
2-16
256 MB (DDR2)
256 MB
Not Present
[Auto]
[PCIE->PCI->IGD]
North Bridge
Parameters
Select DVMT Size; This
option is no function
when a VGA Card is
Installed
Chapter 2: BIOS setup