American Audio UCD-200 Operating Instructions Manual page 9

GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT (CONT)
track by track.
7. TAP/BPM BUTTON - Press this button to switch between manual BPM and Auto BPM. when in manual
BPM mode, tap this button to the beat of the current track.
8. PITCH BUTTON/ PITCH PERCENTAGE SELECTOR - This button is used to turn the pitch function on and
off and choose the pitch percentage. The pitch percentages to choose from are 4%, 8%, 16%, and 100%.
To activate the pitch slider press the button for at least 3 seconds. The pitch functions of the PITCH SLIDER
(5), will not function without this function being activated. See page 18 for more details. The pitch slider and
"+" and "-" pitch bend buttons have a maximum range of +/-100%. (100% Pitch Bend/Pitch Slider works
with CD only)
9. TRACK/FOLDER SEARCH KNOB - This knob is used to search/scroll through the tracks or folders on a
active audio source. The search feature depends on the setting of the FOLDER BUTTON. If you press the knob
in and turn it while in track mode, you can skip ahead 10 tracks. Example: if you are at Track #1, pressing the
knob and turning it clockwise will skip you to Track #11. If you press the knob and turn it clockwise again, it will
skip to Track #21. If there are not that many tracks, it will go back to Track #1.
10. FOLDER/TRACK BUTTON - This button is used to toggle between folders and tracks. when the LED of
the FOLDER BUTTON is lit, the player is in FOLDER search mode. Hold the FOLDER BUTTON down for at
least 2 seconds to activate and deactivate the REPEAT function.
Hold the button down for at least 2 seconds to activate and deactivate the REPEAT function.
REPEAT ON: All the track in the current folder will play track by track until the repeat function is deactivated.
REPEAT OFF: All the tracks in the device will play in the normal mode.
SINGLE REPEAT: The current playing track will play continuously.
11. IN, OUT, & RELOOP -
IN BUTTON - "CUE ON THE FLy" - This function allows you to set a CUE POINT (see CUE POINT page 17)
without music interruption ("on the fly"). This button also sets the starting point of a loop (see LOOP).
OUT BUTTON - This button is used to set the ending point of a loop. A loop is started by pressing the IN
BUTTON, pressing the OUT BUTTON set the loop ending point. The loop will continue to play until the OUT
BUTTON is pressed once again.
RELOOP BUTTON - If a LOOP has been made (see setting a LOOP on page 20), but the Player is not actively
in LOOP mode (a loop is not playing), pressing the RELOOP BUTTON will instantly reactivate the LOOP mode.
To exit the loop, press the LOOP OUT BUTTON.
12. RELAY BUTTON - This button is acitvates Flip-Flop™ mode. See page 21 for more information.
13. PITCH BEND BUTTONS -
(-) PITCH BEND - The (-) pitch bend function creates a momentary "Slow Down" in the pitch speed (Beats
per minute - BPM) when the PITCH (8) function is activated. This function allows the beats between two CD's
or any other music source to match. This is a momentary function. when the button is depressed the pitch
speed will automatically return to PITCH SLIDER'S (5) selected pitch. Holding down this button will give a
maximum of -100% pitch. Be sure to remember that this function is a momentary pitch adjustment, for a more
precise adjustment use the PITCH SLIDER'S (5) to match the BPM's with another playing music source.
(+) PITCH BEND - The (+) pitch bend function creates a momentary "BUMP" in the pitch speed (Beats per
minute - BPM) when the PITCH (8) function is activated. This function allows the beats between two CD's or
any other music source to match. This is a momentary function. when the button is depressed the pitch speed
will automatically return to PITCH SLIDER'S (5) selected pitch. Holding down this button will give a maximum
of +100% pitch. Be sure to remember that this function is a momentary pitch adjustment, for a more precise
adjustment use the PITCH SLIDER'S (5) to match the BPM's with another playing music source.
14. TEMPO LOCK FUNCTION - This button activates the TEMPO LOCK function. This function allows you to
American Audio - www.americanaudio.us - UCD-200 Instruction Manual Page 9
© ®