Error Code Displays - Royal Sovereign RBC-1100 Owner's Manual

eRRoR CoDe DISPLAY
When an error code appears in the preset display window and the machine stops. Please refer to this chart for an
explanation.
error Code
ER0
ER1
ER2
ER3
ER8
EC1
EC2
EC3
EC4
If you are receiving error codes ER0-ER8 check the machine for dust. If you continue to receive errors codes, please
contact Royal Sovereign's Service Center at 1-800-397-1025.
Left counting sensor
Right counting sensor
Hopper sensor
Stacker sensor
Width detection sensor
Half bills, or ripped bills. Remove the bills and press RESET.
Double bills, 2 or more bills stuck together. Place the bills from the stacker back into hopper and
press RESET to continue counting.
Chain of bills, 2 or more bills counted at the same time. Place the bills from the stacker back into
hopper and press RESET to continue counting.
Fake or suspicious bill. Remove the bill and press RESET to continue counting.
10
Reason