Making And Receiving Calls - ClearSounds CSC48 Operating Manual

repeatedly, but do not press and hold for longer than 1
second as this will activate the Track Selection function
(see page 18).

MAKING AND RECEIVING CALLS

█
The QUATTRO supports Hands-Free, Headset, Advanced Audio
Distribution (A2DP) and Audio/Visual Remote Control (AVRCP)
Profiles. Accessing call functions depends on which profile
your phone supports. You can activate all functions for Hands-
Free Profile using the following table. NOTE: Some phones do
not support all features listed. Please consult your phone's
user guide.
Important Terms to know for pressing the Multi-Function button (MFB):
Press and Release - refers to a duration of less than
0.8 seconds. You should hear 1 beep to confirm the
requested action.
Press and Hold - refers to a duration of more than 0.8 but
less than 1.6 seconds. While holding the multi-function button
you will hear one beep, release the Multi-Function button to
confirm the requested action.
Press and Extend Hold - refers to a duration of more than
3 seconds. While holding the multi-function button you will
hear one beep, release the Multi-Function button to confirm
the requested action.
QUATTRO
Function
Power ON
Pairing
Power OFF
Phone QUATTRO
Condition Start Point Phone in Hands-Free Profile
--
--
-- ON (idle)
14 – ENGLISH
OFF Press and Hold the MFB
until the QUATTRO is
powered ON. A set of 4 tones
plays (low to high) and the
LED flashes blue 4 times.
OFF Press and Extend Hold the
MFB for 6 seconds. The LED
will flash blue 4 times and
then alternately flash red
and blue. The QUATTRO can
then be discovered by
another Bluetooth device for
2 minutes.
Press and Extend Hold the
MFB until the QUATTRO is
Action: