Intellishield Highway/City Modes; Muting An Alert; Auxiliary Audio Jack - Cobra XRS 9965 Operating Instructions Manual

Getting Started
Intro Operation Customer Warranty
Display Timeout
Assistance
Your detector has a Display Timeout mode. When Display Timeout is turned On,
the screen will change to Dark from Bright, Dim, or Dimmer after the time interval
selected in Menu mode (see page 23).
Secondary Icons
The Display Timeout setting can be changed so the display is always On.
In Display Timeout mode, the display will show a small dot moving slowly back and
forth near the center of the screen to indicate the unit is turned On.
NOTE
Notice
While at the Dark level under timer control, any alert will turn On
the display at the last brightness setting (Bright, Dim or Dimmer).
Clicking anywhere on the display will also turn On the display.
12 English
Getting Started
Your Detector
Intro Operation Customer Warranty

IntelliShield Highway/City Modes

Assistance
Your detector is equipped with IntelliShield false signal rejection technology
which consists of a Highway mode and three different levels of City modes:
City X, City X+K, and City X Beep Off.
Secondary Icons
Highway mode provides full response to all signals detected. The City modes reduce
false alerts while you are driving in or near urban areas where there are many
sources for conflicting X or K band signals such as microwave towers and automatic
door openers. The factory setting is Highway. The factory City mode default setting
is City X; it can be changed in Menu mode or by pressing the City icon (see page
Notice
19.)
You can toggle between Highway and City modes by clicking on the Highway or City
icon.
NOTE
When you change to City mode, the unit will enter whichever city
default mode is set at the time.

Muting an Alert

Your detector allows you to quickly turn Off an Audio Alert by clicking anywhere on
the touchscreen. If you click on the touchscreen a second time during the alert,
the Audio Alert will be turned back On. After the current alert is gone, the next alert
will be heard.
Two other features are incorporated in your detector to automatically mute or
reduce the audio volume of alerts. See pages 20 and 23 for IntelliMute and
Auto Mute modes.

Auxiliary Audio Jack

The Auxiliary Audio Jack can be used to connect external speakers in environments
with high ambient noise levels. The internal speaker will be disconnected. (This
uses a mini stereo audio connector.)
•
•
•
Nothing Comes Close to a Cobra 13
®