Steps To Connect Your Radio To Your Wireless Network; Step 1 - Power Up The Radio; Step 2 - Scan For A Wireless Network Connection - Grace Digital GDI-IRMS300 User Manual

13
Steps to Connect Your Radio to Your Wireless
Network
Getting Started

Step 1 - Power up the radio

To power your radio connect the AC Power on the back of your MICRO SYSTEM to a wall power outlet.
The radio can be switched on and off with the STANDBY/ON button.
Once powered on, the display on the front of the radio will light up and show:
Grace Digital Radio
After a few seconds, the screen will change to show :
Initializing
Network
After a few seconds, the screen will change to show:
Scan for networks
Enter network
View Config
Edit Config

Step 2 - Scan for a wireless network connection

When the display show <Scan for networks>, press the „Select‟ button. (NOTE: IF you make an error at
any point, press the „Back‟ button to return the previous screen)
The MICRO SYSTEM will now scan for all available wireless networks and will display: