Appendix; Using The Usb Connection As A Usb-Ethernet Connection - Grace Digital GDI-IRMS300 User Manual

Internet radio stereo shelf micro system
Table of Contents

Advertisement

34

APPENDIX

Using the USB Port as a USB-Ethernet Connection
Your radio is equipped with 801.11n Wi-Fi for a wireless connection to your wireless router
that is connected to your internet service. Your radio may also connect using the USB port
with the use of a USB-Ethernet adaptor (separate USB-Ethernet adaptor purchase
required)
Once you have a USB-Ethernet adapter, insert into the USB port, boot up your radio and
the radio will then be able to use the USB-Ethernet adaptor for connection to your network.
IMPORTANT
IF you boot up (power on) the radio without a USB-Ethernet adaptor connected to the
radio's USB socket, the radio will only recognize a USB thumb drive connected to the USB
socket. If a USB-Ethernet adaptor is connected to the radio after the unit is booted up, the
unit will NOT recognize the connection. To have the unit recognize the USB-Ethernet
adaptor connection, the unit must then be rebooted (powered off and powered back on)
while the adaptor connected to the USB port.
The radio will be able to access a USB thumb drive when the USB-Ethernet adaptor is
removed and when a thumb drive is connected to the USB socket.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gdi-irmsamp

Table of Contents