Lan - Buffalo NFINITI High Power WZR-300HP User Manual

Chapter 4 Configuration

LAN

Configure LAN-side and DHCP Server settings.
Parameter
LAN Side IP Address
DHCP Server
Router Mode only
DHCP IP Address Pool
Router Mode only
LAN Side IP Address
(For IP Unnumbered)
Router Mode only
Advanced Settings
Router Mode only
Lease Period
Router Mode only
Default Gateway
Router Mode only
Meaning
By default, the LAN side IP address is 192.168.11.1 with subnet
mask 255.255.255.0. You may change it here.
Enable or disable the DHCP server, which assigns LAN-side IP
addresses automatically.
Configure the range of IP addresses to be assigned by the DHCP
server and IP addresses to be excluded from that range. Values
from 1-256 may be entered.
Set an IP unnumbered LAN side IP address.
Note: A PC with a normal LAN side IP address and a PC with an IP
Unnumbered IP address cannot communicate each other.
Check [Display] to display DHCP server advanced settings options.
Set the effective period of an IP address assigned by the DHCP
server. Up to 999 hours may be entered.
Set the default gateway IP address for the DHCP server to issue to
clients.
- 33 -