Using The Radio - Panasonic RC-DC1 Operating Instructions Manual

Charging an iPod or iPhone
The iPod or iPhone charges automatically when
connected to the main unit.
• See iPod or iPhone display to check its
charging status.
• If the iPod or iPhone is not being used for an
extended period of time after charging has
completed, disconnect it from the main unit,
as the battery will be depleted naturally. (Once
fully charged, additional charging will not
occur.)
Playing an iPod or iPhone
1
Place an iPod or iPhone in the dock and
turn it on.
2
Press [SOURCE] to select "IPOD".
3
Press [4/9] once to start music playback
from the iPod or iPhone. Press again to
pause playback.
4
Press [2/–, ADJ] or [+/6, ADJ] to
skip to the previous or next track.
5
Press and hold [2/–, ADJ] or
[+/6, ADJ] to backward or forward
search through a track.
Note:
• If the iPod or iPhone automatically shuffl es or
skip a track;
– Turn off its "Shake" feature (if there is any).
– Play the iPod or iPhone using an iPod or
iPhone dock adaptor (not included).
• For iPod or iPhone operation details, refer to
12 12
iPod or iPhone's User Guide.

Using the radio

Manual tuning
1
Press [SOURCE] to select "RADIO FM".
2
Press [2/–, ADJ] or [+/6, ADJ] to
select the desired frequency.
To tune automatically
Press and hold [2/–, ADJ] or [+/6, ADJ]
until the frequency starts changing rapidly.
Automatic tuning stops when it fi nds a station or
when [2/–, ADJ] or [+/6, ADJ] is pressed
again.
Note:
For better reception, extend and change the
direction of the FM antenna.
Memory preset
You may store your favourite channels in 5 FM
preset channels.
Preparation
Press [SOURCE] to select "RADIO FM".
Automatic presetting (AP)
Press and hold [SOURCE] until "AP" is
displayed.
Note:
• Automatic presetting begins from the current
frequency.
• Only the fi rst 5 stations detected will be stored.
• "AP" will blink continuously until all 5 channels
have been set.