Using The Sleep Timer; Using The Alarm - Panasonic RC-DC1 Operating Instructions Manual

Manual presetting
1
Press [2/–, ADJ] or [+/6, ADJ] to
select the desired frequency.
2
Press and hold [SET/PRESET] for
2 seconds to display the preset number.
3
Press [2/–, ADJ] or [+/6, ADJ] to
select a preset number.
4
Press [SET/PRESET] again to confi rm.
Tuning in to a preset channel
Press [SET/PRESET] to switch between
preset channels.

Using the sleep timer

This function enables you to turn off the unit
automatically after the set time (only in iPod and
radio mode).
1
Press [SLEEP] to activate the timer.
2
Press [SLEEP] again to select your
desired time (in minutes).
OFF (default) ] 30 ] 60 ] 90 ] 120
Note:
Press [SLEEP] once to check the remaining
time.

Using the alarm

You can set two different alarm times. Before
setting the alarm, make sure to set the clock
(Z page 10, "Setting the clock").
Setting the alarm
1
Press and hold [ALARM 1] or [ALARM 2]
until the hour display blinks.
2
Within 10 seconds, press [2/–, ADJ] or
[+/6, ADJ] to set the hour.
3
Press [ALARM 1] or [ALARM 2] to
confi rm.
4
Repeat steps 2 and 3 to set the minutes.
5
Press [2/–, ADJ] or [+/6, ADJ] to
select the days of the week:
MON-SUN (everyday) ] MON-FRI (weekdays)
SAT-SUN (weekend) SAT-SUN (weekend)
6
Press [ALARM 1] or [ALARM 2] to
confi rm.
7
Press [2/–, ADJ] or [+/6, ADJ] to
select the desired alarm mode: "IPOD",
"RADIO" or "BUZZER".
(Continued on next page)
13 13