Using Your Receiver; Listening To Your Receiver - Insignia NS-R2001 User Manual

Insignia NS-R2001 AM/FM Stereo Receiver

Using your receiver

Tips
The following settings are stored in memory before
the receiver is turned off:
• INPUT SELECTOR settings
• Preset stations.
If the electricity fails or the AC power cord is
unplugged for more than a week, your memory is
cleared.

Listening to your receiver

To listen to your receiver:
1 Press the POWER button on the receiver to put
the receiver in Standby mode. The STANDBY
indicator lights blue.
2 Press the POWER ON button on the remote
control or the ON/STANDBY button on the
receiver to turn the receiver on.
Tip
You can put the receiver in Standby mode by
pressing the STANDBY button on the remote control
when the receiver is on.
With the receiver in Standby mode, you can also turn
the power on by pressing an Input Selector button
on the remote control.
OR
www.insigniaproducts.com
3 To listen to the speakers, press the SPEAKER A
or SPEAKER B button on the remote control or
the SPEAKER A/B button on the receiver to turn
the corresponding speakers on. SPK A, SPK B, or
SPK AB appears on the display and sound can
be heard from the speakers.
-OR-
To listen to the headphones, press the SPEAKER
A or SPEAKER B button on the remote control
or the SPEAKER A/B button on the receiver to
turn the corresponding speakers off. The
corresponding speaker indicator turns off, H
appears on the display, and sound can be heard
from the headphones.
4 Rotate the INPUT SELECTOR knob or press the
Input Selector button to select the input source,
then turn on and set up the device that has
been selected as the source to begin the
playback.
OR
OR
7