HP ProBook 4436s Reference Manual page 89

Select
Intel ME Firmware Local Update
Intel ME Power Control
iAMT Configuration
Select
Host Name
TCP/IP
Provision Model
Setup and Configuration
Un-Provision
SOL/IDE-R
Password Policy
Secure Firmware Update
Set PRTC
Idle Timeout
Change Intel ME Password
Select
Change ME Password
To do this
Disable/enable local management of firmware updates.
Configure the management engine power policies.
To do this
Assign a host name to the computer.
Disable/enable DHCP or configure TCP/IP settings.
Assign the enterprise or small business iAMT model.
Set options to control remote configuration of iAMT.
Reset the iAMT configuration to factory defaults.
Disable/enable remote boot control to an IDE diskette or CD-
ROM and assign a user name and password.
Set options to control requirements for the network password
and the MEBx password.
Disable/enable updating firmware remotely.
Set the real-time clock.
Set a time-out value.
To do this
Change the password.
NOTE:
Using Intel Active Management Technology (select models only)
The default password is admin.
79