Charging The Battery - Samsung YP-GI1C/NA User Manual

Charging the Battery

Your device is powered by a rechargeable, standard Li-Ion
battery. The Travel Charger that is used to charge the battery
is included with your device. Use only Samsung-approved
batteries and chargers.
Note: The battery comes partially charged. You must fully
charge the battery before using your device for the first
time.
After the first charge, you can use the device while
charging.
Warning! Use only approved charging devices. Approved
accessories are designed to maximize battery life.
Using other accessories may invalidate your
warranty and may cause damage.
10
Battery Indicator
The Battery icon in the Status Bar shows the battery
power level. When battery power is 15% or less, your device
prompts you to charge the battery. If you continue to operate
the device without charging, the device powers off. For
battery use information, see "About Device" on page 152.
Using the Travel Charger
1. With the battery installed, locate the Charger/
Accessory Port on the bottom of the device.
Important! Verify that the device battery is installed prior to
connection. If the battery is not properly installed
and the wall charger is connected, the device may
power off and on continuously, preventing proper
operation.
2. Plug the flat end of the Travel Charger into the Charger/
Accessory Interface connector on the device (1) and
the other end into a standard AC wall outlet.