Change User Password
Select this item to set or change the user password. The User Password item on top of the
screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
Select the Change User Password item and press <Enter>.
1.
2.
On the password box, key in a password containing up to six letters, or numbers, or
both, then press <Enter>.
3.
Confirm the password when prompted.
The message Password Installed appears after you set your password successfully.
To change the user password, follow the same steps in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup utility. When
set to [Always], BIOS checks for user password both when accessing Setup and booting the
system. Configuration options: [Setup] [Always]
2.8
Tools menu
The Tools menu items allow you to configure options for special functions. Select an item then
press <Enter> to display the sub-menu.
Main
Ai Tweaker
ASUS EZ Flash 2
Express Gate
Enter OS Timer
Reset User Data
ASUS O.C. Profile
AI NET 2
2.8.1
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
confirm your choice. Please see section 2.1.2 for details.
2-22
BIOS SETUP UTILITY
Advanced
Power
[Auto]
[10 Seconds]
[No]
Boot
Tools
Exit
Press ENTER to run the
utility to select and
update BIOS.
This utility supports
1. FAT 12/16/32 (r/w)
2. NTFS (read only)
3. CD-DISC (read only)
Chapter 2: BIOS information