ASROCK Fatal1ty Z77 Professional Series User Manual page 41

Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Headers
(9-pin USB_6_7)
(see p.15, No. 24)
(9-pin USB_8_9)
(see p.15, No. 25)
USB 3.0 Header
(19-pin USB3_6_7)
IntA_P6_SSRX-
(see p.15, No. 9)
IntA_P6_SSRX+
IntA_P6_SSTX-
IntA_P6_SSTX+
IntA_P6_D-
IntA_P6_D+
Infrared Module Header
(5-pin IR1)
(see p.15, No. 29)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.15 No. 42)
Either end of the SATA data
cable can be connected to the
SATA / SATA2 / SATA3 hard
disk or the SATA2 / SATA3
connector on this motherboard.
Please connect the black end
of SATA power cable to the
power connector on each drive.
Then connect the white end of
SATA power cable to the power
connect to the
power supply
connector of the power supply.
Besides six default USB 2.0
ports on the I/O panel, there are
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB 2.0
ports.
USB_PWR
P-9
P+9
GND
DUMMY
1
GND
P+8
P-8
USB_PWR
Besides six default USB 3.0
Vbus Vbus
ports on the I/O panel, there is
Vbus IntA_P7_SSRX-
IntA_P7_SSRX+
one USB 3.0 header on this
GND
GND IntA_P7_SSTX- motherboard. This USB 3.0
IntA_P7_SSTX+
header can support two USB 3.0
GND
GND IntA_P7_D-
ports.
IntA_P7_D+
DUMMY
This header supports an
IRTX
+5VSB
DUMMY optional wireless transmitting
and receiving infrared module.
1
GND
IRRX
This connector allows you
CD-L
to receive stereo audio input
GND
GND
from sound sources such as
CD-R
CD1 a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
41