Download Print this page

HP A8051A Installation Instructions page 2

3dlabs wildcat iii 6110 graphics accelerator card

Advertisement

Install 3DLabs
Wildcat III Card in
AGP Pro Slot
Example system board
4. Once you have installed the card, you must install the proper graphics driver which is available on the enclosed
3Dlabs Wildcat III CD.
To obtain future driver upgrades and the Card Installation Instructions as supplied by 3Dlabs go to:
http://www.hp.com/go/workstationsupport
a. If you are installing on a system that previously had a different graphics card, you must uninstall that device's
driver. Use the Windows
down the system.
b. Remove the old graphics card. Install the 3Dlabs Wildcat III card and reboot the system. Then install the Wil-
cat III driver from the provided CD-ROM.
5. Refer to your workstation's Owner's Guide for instructions on how to verify your graphics configuration.
For information on other 3Dlabs products, visit: http://www.3dlabs.com
HP Hardware Warranty
This HP accessory is covered by a limited hardware warranty for a period of one year from the date of purchase by
the original end-user. The type of service provided is return to an HP or repair-authorized reseller service-center. At
Hewlett-Packard's discretion, a defective accessory will be repaired or replaced by a new unit, either of the same type
or of an equivalent model.
If this accessory is purchased and used together with an HP Visualize Personal Workstation, it will be covered by the
warranty of this computer or workstation, under the same conditions of service and duration. Please refer to the war-
ranty statement provided with your HP Visualize Personal Workstation for warranty limitations, customer responsi-
bilities, and other terms and conditions.
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND: The warranty terms contained in
this statement, except to the extent lawfully permitted, do not exclude, restrict or modify and are in addition to the
mandatory statutory rights applicable to the sale of this product to you.
®
Control Panel utilities (Add/Remove Programs) to remove the old driver. Then shut
secondary port
primary port
Example graphics card

Advertisement

loading

This manual is also suitable for:

3dlabs wildcat iii 6110