HP Workstation x1000 User Manual page 9

ladoga.bk : ladga-us.fb4 Page 7 Friday, January 15, 1999 3:28 PM
NOTE
NOTE
Optimizing Image Quality
Each time you connect your monitor to a different computer you should use
the HP Optimizer Utility, supplied on floppy disk, to optimize the quality of the
image. This utility displays test patterns that help you configure your monitor
correctly. (For installation instructions, see your
Adjust the following to optimize image quality:
Brightness and Contrast
To adjust brightness and contrast directly:
1 Rotate the adjustment control to select
2 Make your adjustments using the
It is recommended that you select a value of around 70% for brightness and
50% for contrast.
3 Press to save your adjustments.
You can also adjust the contrast and brightness by selecting
BRIGHTNESS from the OSD main menu. Make your adjustments using the
control, then press to return to the OSD main menu.
Auto-Configuration
If you use auto-configuration you can configure your monitor without having
to adjust your monitor's position, clock frequency and phase manually. To use
auto-configuration, follow the instructions in your HP Optimizer Utility (for
installation instructions, see your
With auto-configuration it is not necessary to adjust
POSITION CLOCK or
follow the on-screen instructions in the HP Optimizer Utility to adjust these
options manually.
HP 18.1" LCD Color Monitor User's Guide
Quick Setup Guide
or
control.
).
Quick Setup Guide
PHASE. However, if the results are unsatisfactory,
Configuring Your Monitor
).
.
CONTRAST or
H POSITION, V
English 7