Advertisement
Available languages
Available languages
Attach front mounting brackets
1.
Attach each front bracket to outer-
most set of holes with 2 screws.
Attach rear mounting brackets
•
Each rear bracket has tabs marked "A" and "B".
TAB B
•
Each pedestal has slots in the rear marked "1", "2"
and "3".
SLOT 1
SLOT 2
SLOT 3
•
Each rear bracket also has 2 arrows indicating
bracket direction when mounted on the pedestal.
DIRECTION
INDICATOR
ARROWS
Front brackets
from kit.
1.
Determine your appliance type (washer or dryer) according to column
1 in table below.
2.
Orient rear brackets according to column 2 for your particular model.
3.
Attach each bracket with 2 screws through the holes that line up on
pedestal.
TAB A
1 - Appliance
DRYER
WASHER
3
DRAWER
2 - Rear bracket orientation
•
Tab A into
•
Slot 1
•
Arrow pointing to back
•
Tab A into
•
Slot 1
•
Arrow pointing to front
Advertisement
