HP T5135 - Compaq Thin Client Configuration page 16

1. On the Connections menu (highlighted in the picture above), click New.
2. On the Connections menu (highlighted in the picture above), click New.
The Properties dialog box appears with the Network page displayed. The Network option is
default and is correct.
3. Deselect Use Default and select TCP/IP for the Network Protocol.
4. For Server Location, enter the name or IP of the server.
5. Click Server or Published Applications.
Note:
XP Pro can only be published as an application in Citrix's current release of
DDI.
6. For a server desktop, type the name or IP address of the server or click Browse to select from a list
of servers.
7. For a published application (i.e. XP Pro Desktop Connection), type the name of the published
application or click Browse to select from a list of published applications.
8. Once you have added the connections, your connection center should look similar to the picture
below.
Opening a Connection
Highlight the name of the connection you want to make and click on the connect button, both have
been highlighted in the picture below.
16