T1500/T1510 Windows-Based Terminal Quick-Start Guide - Compaq t1000 - Terminal Thin Client PC Network Installation Manual

A
T1500/T1510 Windows-Based
Terminal Quick-Start Guide
The T1500/T1510 Windows-Based Terminal is shipped from the factory configured
for local boot. Instructions are included in this appendix to convert to network boot if
you require this mode of operation.
If you require additional network services for a local-boot (default) terminal, you
must use the server setup procedure. This procedure starts with Chapter 1 of this
document.
- OR -
If you change the terminal to boot from a network server, you must perform the
complete server setup procedure that starts with Chapter 1 of this document.
Note
If the site has a DHCP server and the terminal
connects through the network port, except for power
and interface cable connections the administrator can
perform all of the setup functions from a remote server.
Refer to T1500/T1510 Windows-Based Terminal Client
Manager on the Software and Documentation CD
(requires Adobe Acrobat Reader).