HP SR5505F - Compaq Presario - 1 GB RAM Getting Started Manual page 179

4 You can use the magicMoments feature in muvee autoProducer to mark specific scenes
in a video clip that you want to include in, or leave out of, the final movie:
a Select a video file in the Select Video/Pictures window, and then click the
magicMoments button. The magicMoments window opens.
b Click the Play button to start viewing the video.
c Use the magicMoments controls to mark the video scenes to include and exclude:
Click and hold down the green thumbs-up button to mark scenes that must
be included in the movie.
Click and hold down the red thumbs-down button to mark scenes that
must be left out of the movie.
NOTE: Press the Shift key on the keyboard, and then click the scene to undo
scenes that were marked with the thumbs-up or thumbs-down buttons.
Click and hold down the gray thumb button to unmark one second of a
selected scene.
Click and hold down the arrow buttons to navigate backward and forward
through the video footage.
Video footage left unmarked is still analyzed when you make the movie, and you
can decide at that time whether to include it in the final version of the movie.
For best results when using the magicMoments feature:
Keep each magicMoment to less than 10 seconds.
Keep the total duration of magicMoments to less than 50 percent of the
duration of the movie. It is recommended that you select only a few scenes.
d When you are done marking scenes, click OK. The window closes. Note that the
video clip is marked on the lower-left side.
Creating Movies by Using muvee autoProducer
169