Replacement Procedures
4.3 Dummy card
Removing a Dummy New card
The following describes the procedure for removing a Dummy card (See Figure 4-2-1).
CAUTION: Insert or remove a Dummy card in accordance with any instructions in a
Dummy card manual or the manuals of the computer system you are using.
1. Push the eject button 1. It will pop out Dummy New Card when you release it. And
eject button 2 for NEW Card Then press the eject button once more to eject a
Dummy card.
2. Grasp one of Dummy New card and remove it.
NOTE: If a Dummy card is not inserted all the way, the eject button may not pop out. Be
sure to push a Dummy card firmly and press the eject button again.
Satellite A300 Maintenance Manual(960-Q08)
Push
Figure 4-2-1 Removing a Dummy card
4-11