TAGGING AND CAPTURING GREAT
MOMENTS WHILE RECORDING
(MY CLIP FUNCTION)
My Clip lets you tag good scenes with the My Clip icon (
pressing the [PHOTO] button while you are recording a video, and
then lets you extract those clips from the video and watch them
separately. The camcorder also captures photos at the same time.
1
Press the [Recording start/stop] button.
The recording () indicator appears and recording starts.
•
2
Press the [PHOTO] button at each
great moment while recording.
The camcorder tags the scenes
•
as My Clip (
) and captures
photos at the same time.
3
To stop recording, press the
[Recording start/stop] button again.
Understanding My Clip function
Captured photos are saved in the photo thumbnail view.
) by
You can extract and play back the scenes tagged as
'My Clip'( ) from a video.
• The camcorder can tag up to 5 moments as 'My Clip' and capture
up to 5 photos while recording a video.
• When you use the My Clip function, the camcorder tags the scene
so that it starts 3 seconds before you pressed the [PHOTO] button
and ends five seconds after you pressed the [PHOTO] button.
• Photos are captured in the video recording resolution.
[220Min]
• When you use time lapse recording, the My Clip function does not
0005
operate.
• You can also tag any scenes in a video by pressing the [PHOTO]
button during video playback. page 46
• The captured photos are not recorded if an error occurs during
video recording or the camcorder does not complete recording
successfully.
Basic recording
During a video
recording
page 45
37