Samsung HMX-F90BP User Manual page 100

Adjusting the image during recording
Symptom
Focus does not adjust automatically.
The image appears too bright or flickering, or
changes in colour.
Playback on your camcorder
Symptom
The video does not play back.
The Skip or Search function does not work properly.
Playback is interrupted unexpectedly.
You cannot hear sound when playing back a Time
Lapse recording.
Photos stored on a storage media do not appear in
the actual size.
Playback on other devices (TV, etc.)
Symptom
You cannot view the image or hear the sound on the
connected device.
100
You cannot dub correctly using the HDMI cable.
• Set Focus to Auto. page 58
• The recording conditions are not suitable for auto focus.
Adjust the focus manually. page 58
• The lens is dusty on the surface. Clean the lens and check the focus.
• You are recording in a dark place. Increase the brightness.
• This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury lamp. Cancel
iSCENE to minimise these phenomena. page 52
• Press the [MODE] button to set the video playback mode.
• Image files recorded on another camcorder may not play back on your camcorder.
• Check out memory card compatibility. page 31
• If the temperature inside the camcorder is too high, it cannot function properly.
Turn the camcorder off, wait for a few moments, and then turn it on again.
• Check if the power adaptor or battery is properly connected and stable.
• The Time Lapse REC function does not record sound.
• Photos recorded on other devices may not appear at their actual size. This is not an error.
• Connect the audio line of the Audio/Video cable jack to your camcorder and the connected device (TV,
DVD recorder, etc). (Red colour- right, White colour- left)
• The Audio/Video cable jack or micro HDMI cable jack is not connected properly. Make sure that the
Audio/Video cable jack or micro HDMI cable jack is connected to the proper jack. page 82
• You cannot dub images using the HDMI cable.
Explanation/Solution
Explanation/Solution
Explanation/Solution
Troubleshooting