Table of Contents
Advertisement
88
Getting Started Guide
5 You can mark specific scenes in a video clip to include or leave out of your final
movie, with the magicMoments feature in muvee autoProducer.
To select video scenes with magicMoments:
a Select a video file in the Select Video/Pictures window, and then
click the magicMoments button. The magicMoments window
opens.
b Click the Play button to start viewing the video.
c
Use the magicMoments controls to mark video scenes to include and
exclude:
•
Click and hold down the green thumbs-up button to mark scenes that
must be included in the movie.
•
Click and hold down the red thumbs-down button to mark scenes
that must be left out of the movie.
•
Click and hold down the gray thumb button to undo one second of a
selected scene. Shift and click to undo scenes that were marked with the
thumbs-up or thumbs-down buttons.
•
Click and hold down the arrow buttons to navigate backward and
forward through the video footage.
Video footage left unmarked is still analyzed when you make the movie and
may be included in the final version of the movie.
For best results with the production of your movie:
•
Keep each magicMoment to less than 10 seconds.
•
Keep the total duration of magicMoments to less than 50 percent of the
duration of your movie. It is recommended to select only a few scenes.
d Click OK when you finish marking scenes. The window closes. Note that
the video clip is marked on the lower-left side.
Advertisement
Table of Contents
