Bios Settings; Boot - Asus TX300CA E-Manual

BIOS Settings

NOTE: The BIOS screens in this section are for reference only. The
actual screens may differ by model and territory.

Boot

This menu allows you to set your boot option priorities. You may
refer to the following procedures when setting your boot priority.
On the Boot screen, select Boot Option #1.
1.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset
Boot Configuration
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
UEFI Boot
CSM16 Module Version
Gate A20 Active
Option ROM Messages
INT19 Trap Response
Driver Option Priorities
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Option #3
BEV Device BBS Priorities
Hard Drive BBS Priorities
Add New Boot Option
Delete Boot Option
CSM parameters
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
ASUS Transformer Book E-Manual
Boot Security Save & Exit
2
[Off]
[Enabled]
[Enabled]
07.69
[Upon Request]
[Force BIOS]
[Immediate]
[Windows Boot...]
[Hitachi HTS...]
[ASIX...]
Set Administrator
Password. The password
length must be in the
following range:
Minimum length 3
Maximum length 20
→← : Select Screen
: Select Item
↑↓
Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized Defaults
F10 : Save & Exit
ESC : Exit
71