IBM ThinkPad i Series 1800 Troubleshooting Manual page 28

Solving computer problems
For Windows NT:
If you have enabled the CD-ROM AutoRun feature, the computer does not
enter standby mode through the timer . To enable the timer in this situation,
edit the configuration information in the registry as follows:
Problem: The Fn+F12 key combination does not make the computer enter
hibernation mode.
Solution: Enable hibernation mode as follows:
For Windows 98:
1. Start the ThinkPad Configuration program.
2. Click Power Management .
3. Click the Hibernation tab.
4. Click the Enable hibernation... button.
5. Click the Create Now button.
The computer cannot enter hibernation mode if you are using one of the IBM
communication PC Cards. To enter hibernation mode, stop the communication
program, and then remove the PC Card or disable the PC Card slot, using the
Control Panel.
For Windows NT:
Note: You must format your hard disk with the FAT format system to use
1. Start the ThinkPad Configuration program.
2. Click Power Management.
3. Click Suspend/Resume Options.
4. Click Enable Hibernation.
5. Click OK.
The computer cannot enter hibernation mode when you are using one of the
IBM communication PC Cards. To enter hibernation mode, stop the
communication program, and then remove the PC Card or disable the PC
Card slot, using the Control Panel.
20
®
ThinkPad A21e Service and Troubleshooting Guide
0
hibernation mode in Windows NT. If you format your hard disk with
NTFS, the default format in Windows NT, you cannot use hibernation
mode.