Chapter 2 Replacing Hardware; Removing The Computer Cover - Lenovo IdeaCentre K210 Hardware Replacement Manual

K210 hardware replacement guide
Hide thumbs Also See for IdeaCentre K210:
Table of Contents

Advertisement

Chapter
Attention
Do not remove the computer cover or attempt any repair before reading the
"Important safety information" in the Safety and Warranty Guide that was
included with your computer or in the Hardware Maintenance Manual (HMM)
for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at http://www.lenovo.com/support.
Note
Use only parts provided by Lenovo.

Removing the computer cover

Important
Turn off the computer and wait 3 to 5 minutes to let the computer cool
before removing the computer cover.
To remove the computer cover:
1.
Remove any media (diskettes, CDs, or tapes) from the drives, shut down your
operating system, turn off all attached devices, and the computer.
2.
Unplug all power cords from electrical outlets.
3.
Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer. Refer to "Locating connectors on the front of the computer" and
"Locating connectors on the rear of the computer".
4.
Remove any locking devices that secure the computer cover.
31032753 IdeaCentre K_HRG_EN.indd 11
Replacing hardware
Hardware Replacement Guide
2007.12.10 3:53:19 PM
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ideacentre k

Table of Contents