Replacing The Power Cord - Lenovo IdeaCentre B325 Hardware Replacement Manual

Replacing the power cord

Attention:
Do not remove the computer cover or attempt any repairs before reading
the "Important safety information" in the Safety and Warranty Guide that was
included with your computer or in the Hardware Maintenance Manual (HMM)
for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at: http://consumersupport.lenovo.com
To replace the power cord
1. Remove any media (disks, CDs, or memory cards) from the drives, shut down
the operating system, and turn off the computer and all attached devices.
2. Locate the connector for the power cord. Refer to "Rear view".
3. Disconnect the defective power cord from the computer and connect the new
power cord to the same connector.
20
Hardware Replacement Guide