Lenovo H405 Hardware Replacement Manual page 22

7. Use the thermal grease syringe to place five drops of grease on the top of the
microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the
grease syringe).
8. Install the heatsink and fan assembly onto the heatsink retention bracket.
9. Reconnect the disconnected cables to the system board.
10. Refer to "Completing the installation".
31045292_H4_HRG_EN_V1.0.indd 19
Hardware Replacement Guide
2010.9.19 11:11:28 AM