Led Indicator; Power Saving - Samsung SCH-R830 User Manual

LED Indicator

The LED indicator on the front of the phone displays when
the phone is locked, to notify you of status changes and
events. Use LED indicator settings to configure how the LED
functions.
1. From the Settings screen, under Device, touch LED
Indicator. The LED Indicator screen appears.
2. Touch the following options to enable or disable them.
(When enabled, a check mark appears in the check
box.):
• Charging: When enabled, the LED glows red during charging,
and green when the battery is fully charged.
• Low battery: When enabled, the LED blinks red to indicate low
battery charge.
• Missed event: When enabled, the LED blinks orange to show
that you have missed calls, new messages, or application
events.
• Voice recording: When enabled, the LED glows while you are
making a voice recording, but only when the screen is off.
156

Power saving

Configure Power saving settings to conserve battery power.
1. From the Settings screen, under Device, touch Power
saving. The Power saving screen appears.
2. Touch Power saving to enable or disable the option:
• Touch Power saving
• Touch Power saving
Power saving must be enabled (
the Power saving mode settings.
3. Touch the following Power saving mode settings to
enable or disable them. (When an option is enabled, a
check mark appears in its check box.):
• CPU power saving: When enabled, the phone's maximum
performance is limited. This does not affect normal usage,
such as browsing and video playback.
• Screen power saving: When enabled, the screen uses
reduced frame refresh rate and lower brightness.
4. Under Power saving tips, touch Learn about power saving
to read information about Power saving options.
to enable Power saving.
to disable Power saving.
) to configure