Samsung SCH-R830 User Manual page 151

S Beam
S Beam uses your phone's NFC (Near Field Communication)
to send, or "beam", content to other NFC and Wi-Fi Direct
devices, by holding the devices close together.
S Beam works in the background. To share pictures or videos
from Gallery, videos from Video player, or songs from Music
player. Just bring the devices together (typically back-to-
back), then tap the screen.
Turning S Beam On or Off
1. From the Settings screen, under Wireless and network,
touch More settings.
2. Touch S Beam. The S Beam screen appears.
3. Touch S Beam
touch S Beam
Note: When you turn S Beam on, the NFC option automatically
becomes enabled and a check mark appears in its
check box. (For more information, refer to "NFC" on
page 145.)
146
to turn S Beam On, or
to turn S Beam Off.
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other over a
direct Wi-Fi connection, without a network or Wi-Fi hotspot.
For example, some printers support Wi-Fi Direct, and you
could print from your phone using Wi-Fi Direct.
Turning Wi-Fi Direct On or Off
1. From the Settings screen, under Wireless and network,
touch More settings.
2. Touch Wi-Fi Direct
touch Wi-Fi Direct
Note: If you have the Wi-Fi client option or the Portable Wi-Fi
Hotspot turned on, a prompt pops-up asking you to
verify that you want to disable either of these options
and turn Wi-Fi Direct on. To turn Wi-Fi Direct on, touch
OK.
The Wi-Fi Direct screen appears, and your phone scans
for available Wi-Fi Direct devices and lists them under
Available devices.
to turn Wi-Fi Direct On, or
to turn Wi-Fi Direct Off.