Normal Setup 3 - Samsung NX10 User Manual

Camera settings menu

Normal setup 3(

Display
Select
Sensor
107
Cleaning
Video Out
Anynet+
(HDMI-
CEC)
)
3
Auto Select*: Convert between Main Display and EVF by eye sensor
Main Display: The screen will be shown only through Main Display
EVF: The screen will be shown only through EVF
Sensor Cleaning: Removes the dust of sensor when executing this menu
Start Up Action: If set, the dust of sensor is removed whenever turning on the power. (On, Off*)
Because this product uses interchangeable lenses, the sensor can get dust on it when you change lenses.
This can lead to dust particles appearing in the pictures you take. We recommend that you do not change
lenses when you are in a particularly dusty area. Also, make sure to attach the lens cap to the lens when not
using it.
Select the video output signal appropriate for your country when connecting the camera to an
external video device such as a monitor or TV.
NTSC* : US, Canada, Japan, Korea, Taiwan, Mexico, etc.
PAL (supporting only the BDGHI method) : Australia, Austria, Belgium, China, Holland, Finland,
Germany, England, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway, etc.
When you connect the camera to an HDTV that supports Anynet+ (HDMI-CEC), you can control the
play function of the camera with the TV remote controller (p. 90).
On* : You can control the play function of camera with the TV remote controller.
Off : You can NOT control the play function of camera with the TV remote controller.
* Default value