Security Passwords; Hardware Management; Hardware Monitoring And Fan Speed Control - Intel BOXDH57JG Product Manual

Product guide
Table of Contents

Advertisement

Security Passwords

The BIOS includes security features that restrict whether the BIOS Setup program can
be accessed and who can boot the computer. A supervisor password and a user
password can be set for the BIOS Setup and for booting the computer, with the
following restrictions:
The supervisor password gives unrestricted access to view and change all Setup
options. If only the supervisor password is set, pressing <Enter> at the password
prompt of Setup gives the user restricted access to Setup.
If both the supervisor and user passwords are set, you must enter either the
supervisor password or the user password to access Setup. Setup options are then
available for viewing and changing depending on whether the supervisor or user
password was entered.
Setting a user password restricts who can boot the computer. The password
prompt is displayed before the computer is booted. If only the supervisor
password is set, the computer boots without asking for a password. If both
passwords are set, you can enter either password to boot the computer.
For instructions on resetting the password, go to Clearing Passwords on page 52.

Hardware Management

The hardware management features of Intel Desktop Board DH57JG enable the board
to be compatible with the Wired for Management (WfM) specification. The board has
several hardware management features including the following:
Fan speed monitoring and control
Thermal and voltage monitoring
Chassis intrusion detection

Hardware Monitoring and Fan Speed Control

The features of the hardware monitoring and fan speed control include:
Intel Quiet System Technology, delivering acoustically-optimized thermal
management
Thermal sensors in the processor and Intel H57 PCH, as well as near the processor
voltage regulators and system memory
NOTE
The minimum thermal reporting threshold for the Intel H57 PCH is 59 °C. The
PCH's thermal sensor will display 59 °C until the temperature rises above this
point.
Monitoring of system voltages to detect levels above or below acceptable values
Thermally monitored closed-loop fan control for all fans that can adjust fan speed
as needed
Desktop Board Features
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dh57jg

Table of Contents