Intel H57 Express Chipset; Main Memory - Intel BOXDH57JG Product Manual

®
Intel H57 Express Chipset
The Intel H57 Express Chipset, consisting of the Intel H57 Platform Controller Hub
(PCH), provides interfaces to the processor and the USB, SATA, LPC, audio, network,
display, and PCI Express x1 interfaces. The Intel H57 PCH is a centralized controller
for the board's I/O paths.

Main Memory

NOTE
To be fully compliant with all applicable Intel
board should be populated with DIMMs that support the Serial Presence Detect (SPD)
data structure. If your memory modules do not support SPD, you will see a
notification to this effect on the screen at power up. The BIOS will attempt to
configure the memory controller for normal operation.
The board has two DIMM sockets and supports the following memory features:
• Two independent memory channels with interleaved mode support
• Support for non-ECC, unbuffered, single-sided or double-sided DIMMs with x8
organization and single-sided DIMMs with x16 organization
• 8 GB maximum total system memory (with 2 Gb memory technology)
• Minimum total system memory: 512 MB using a 1 Gb x16 module
• Serial Presence Detect
• DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs
NOTE
32-bit operating systems are limited to a maximum of 4 GB of memory. These
operating systems will report less than 4 GB because of the memory used by
add-in graphics cards and other system resources.
Desktop Board Features
®
SDRAM memory specifications, the
15