Sony IC Recorder ICD-PX312M Operating Instructions Manual page 120

Message
文件存储已满
文件已损坏
请格式化本机
无法继续处理
请停止操作后再重新插入
存储卡
请设置日期时间
曲目标记已满
文件不存在
无曲目标记
电池电量低
120
GB
Cause/Remedy
• When there are already the maximum number of files in the
selected folder or the total number of files stored on the IC
recorder has exceeded the maximum, you cannot record a new
file. Erase some files before recording.
• You cannot play back or edit files, because the data of the selected
file is damaged.
• The IC recorder cannot be turned on using the computer because
there is no copy of the control file required for operation. Format
the IC recorder using the formatting function in the menu
(page 84). Do not use your computer to format the IC recorder.
• The IC recorder failed in memory access. Remove and then re-
insert the batteries.
• Save a backup copy of your data and format the IC recorder using
the menu (page 84).
• A memory card was inserted during recording or playback.
Remove the memory card and insert it while the IC recorder is in
the stop mode.
• Set the clock; otherwise, you cannot set the alarm.
• You can set up to 98 track marks for a file. Cancel unwanted track
marks (page 63).
• The selected folder does not have any files. You cannot move a
file or set the alarm, etc., because of this.
• There are no track marks when you attempt to erase a track mark
or track marks, or divide a file at all the track mark positions.
• You cannot format the memory or erase all the files in a folder
because of insufficient battery power. Replace the old LR03 (size
AAA) alkaline batteries with new ones (page 11). Or replace the
old rechargeable batteries with new ones.