Samsung MZ-5PA064 User Manual page 13

10. The Firmware upgrade process will start and a message Downloading
Firmware.... is displayed. Do not operate the system during the upgrade
process.
11. On Successful Completion of Firmware, you will be asked to Power Off /
On the drive. A confirmation message Confirm After Power Off / On? [Y]
is displayed. Follow the steps below in sequence:
Note: Power Off / On message is optional. Depending on the firmware
download type, this message is displayed.
• Unplug the SATA cable from the SSD
• Unplug the power cable
© 2010 Samsung Electronics
Figure 5: Data Backup Confirmation
9