Sharp LC-60C46U Service Manual page 13

12.Remove the 1 rivet and detach the earth plate.
13.Remove the 9 lock screws
14.Disconnect the 3 connectors (MA, FC, SA), and COAXIAL Wire.
15.Remove the 2 lock screws
16.Remove the 7 lock screws
17.Remove the 4 lock screws
18.Remove the 4 lock screws
19.Disconnect the 2 connectors
20.Remove the 2 lock screws
21.Remove the 4 lock screws
Heat Sink
12
13
14
Terminal Angle
and detach the Tray Chassis.
, 3 lock screws and detach the Terminal Angle.
and detach the POWER SUPPLY PWB.
and detach the TERMINAL PWB.
, and the spacer, rivet and detach the Heat Sink and MAIN PWB.
, and detach the Speaker-L and R.
and detach the R/C, LED PWB.
and detach the plates.
17
Spacer
18
MAIN PWB
17
11
MA FC SA
Earth
Plate
COAXIAL Wire
16
R/C, LED
Cover
Speaker-R
15
12
Tray Chassis
TERMINAL PWB
R/C, LED PWB
21
20
19
4 – 4
LC-60C46U
POWER SUPPLY PWB
22
Plate
Speaker-L