Page 1
AEP Model Revised-1 UK Model E Model Chinese Model Replace the previously issued Korea Model SERVICE MANUAL 9-876-736-11 with this manual. Photo: DSC-W1/Silver Link Link SCHEMATIC DIAGRAMS PRINTED WIRING BOARDS REPAIR PARTS LIST SCHEMATIC DIAGRAMS PRINTED WIRING BOARDS REPAIR PARTS LIST •...
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS Link Link CH-146 BOARD CH-146 BOARD (CCD SIGNAL PROCESS) SY-102 BOARD (6/6) (CCD SIGNAL PROCESS) SY-102 BOARD (6/6) (DC/DC CONVERTER) (DC/DC CONVERTER) SY-102 BOARD (1/6) SY-102 BOARD (1/6) (CAMERA MODULE) SW-422 BOARD (CAMERA MODULE) SW-422 BOARD...
Page 4
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For schematic diagrams) 1. Connection • All capacitors are in µF unless otherwise noted. pF : µ...
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS CH-146 BOARD CH-146 BOARD For Schematic Diagram • Refer to page 4-39 for printed wiring board. CH-146 BOARD :Voltage measurment of the CSP ICs R011 R010 and the Transistors with mark, are not possible.
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS SY-102 BOARD SIDE A SY-102 BOARD SIDE A SY-102 BOARD SIDE B SY-102 BOARD SIDE B For Schematic Diagram • Refer to page 4-39 for printed wiring board. : Voltage measurment of the CSP ICs...
Page 7
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS SY-102 BOARD SIDE A SY-102 BOARD SIDE A SY-102 BOARD SIDE B SY-102 BOARD SIDE B For Schematic Diagram • Refer to page 4-39 for printed wiring board. XX MARK:NO MOUNT :Voltage measurment of the CSP ICs...
Page 8
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS SY-102 BOARD SIDE A SY-102 BOARD SIDE A SY-102 BOARD SIDE B SY-102 BOARD SIDE B For Schematic Diagram • Refer to page 4-39 for printed wiring board. SY-102 BOARD (3/6) XX MARK:NO MOUNT...
Page 9
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS SY-102 BOARD SIDE A SY-102 BOARD SIDE A SY-102 BOARD SIDE B SY-102 BOARD SIDE B For Schematic Diagram • Refer to page 4-39 for printed wiring board. R535 MELODY_ENV 2700 SY-102 BOARD (4/6)
Page 10
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS SY-102 BOARD SIDE A SY-102 BOARD SIDE A SY-102 BOARD SIDE B SY-102 BOARD SIDE B For Schematic Diagram • Refer to page 4-39 for printed wiring board. XX MARK:NO MOUNT : Voltage measurment of the CSP ICs...
Page 11
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS SY-102 BOARD SIDE A SY-102 BOARD SIDE A SY-102 BOARD SIDE B SY-102 BOARD SIDE B For Schematic Diagram • Refer to page 4-39 for printed wiring board. SY-102 BOARD (6/6) : Voltage measurment of the CSP ICs...
Page 12
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS SW-422 BOARD SW-422 BOARD For Schematic Diagram • Refer to page 4-43 for printed wiring board. SW-422 BOARD : Voltage measurment of the CSP ICs and the Transistors with mark, are not possible.
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS MS-204 BOARD MS-204 BOARD For Schematic Diagram • Refer to page 4-45 for printed wiring board. MS-204 BOARD (2/2) : Voltage measurment of the CSP ICs Note: MS-204 board is included in and the Transistors with mark, are MS-205 flexible complete board.
Page 15
DSC-W1/W12 4-3. PRINTED WIRING BOARDS Link Link CH-146 BOARD JK-263 BOARD CH-146 BOARD JK-263 BOARD SY-102 BOARD (SIDE A) SP-045 FLEXIBLE BOARD SY-102 BOARD (SIDE A) SP-045 FLEXIBLE BOARD SY-102 BOARD (SIDE B) MS-204 BOARD SY-102 BOARD (SIDE B) MS-204 BOARD...
Page 16
DSC-W1/W12 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS • : Uses unleaded solder. • Chip parts. Transistor Diode • : Circuit board : Flexible board Pattern from the side which enables seeing.
Page 17
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION MOUNTED PARTS LOCATION SY-102 CH-146 Note for Printed Wiring Board (See page 4-35). Note for Printed Wiring Board (See page 4-35). : Uses unleaded solder.
Page 18
DSC-W1/W12 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS MOUNTED PARTS LOCATION MOUNTED PARTS LOCATION Note for Printed Wiring Board (See page 4-35). : Uses unleaded solder. SY-102 BOARD (SIDE B) Q010 CN702 C047...
DSC-W1/W12 SECTION 5 REPAIR PARTS LIST NOTE: • -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name. • Items marked “*” are not stocked since they are seldom required for routine The components identified by mark 0 or service.
DSC-W1/W12 CH-146 JK-263 MS-204 5-2. ELECTRICAL PARTS LIST Ref. No. Part No. Description Ref. No. Part No. Description CP101 A-7113-090-A CH-146 BOARD, COMPLETE MS-204 BOARD, COMPLETE (Not supplied) *********************** *********************** (CH-146 board (CP101) is included in SY-102 complete board.) (MS-204 board is included in MS-205 flexible complete board.) <...
Page 26
DSC-W1/W12 Ver. 1.4 2007.10 MS-204 MS-205 The changed portions from Ver. 1.3 are shown in blue. Ref. No. Part No. Description Ref. No. Part No. Description < RESISTOR > R801 1-218-975-11 RES-CHIP 1/16W R804 1-208-933-11 METAL CHIP 0.5% 1/16W R805 1-208-707-11 METAL CHIP 0.5%...
Page 27
DSC-W1/W12 SW-422 SY-102 Ref. No. Part No. Description Ref. No. Part No. Description A-7079-041-A SW-422 BOARD, COMPLETE A-1065-212-A SY-102 BOARD, COMPLETE (SERVICE) *********************** ******************************* (This complete board is including CP101 (CH-146 board) < CAPACITOR > and IC301 (KWF board).) C151 1-165-908-11 CERAMIC CHIP <...
Page 32
• Addition of Argentine Model (W1) • Addition of E, Korea and Chinese Models (W12) Argentine model was added at DSC-W1 and E, Korea and Chinese models were added at DSC-W12. The differences with other area models are only accessories.
Page 33
SCHEMATIC DIAGRAMS SCHEMATIC DIAGRAMS • Along with SONY TYPE, AUO TYPE is added at type of LCD. • For ADJUSTMENTS of LCD, refer to the SERVICE MANUAL, ADJ SUPPLEMENT-1 (9-876-736-88). • When the machine needs to be repaired, make sure to follow the item of “LCD TYPE CHECK”.
Page 34
MS-276 (2/2) (LCD DRIVE) ·········································· 4-7 4-3. Printed Wiring Boards ··················································· 4-11 JK-289 ··········································································· 4-12 SP-045 FLEXIBLE ······················································· 4-12 MS-276 ·········································································· 4-13 MS-259 FLEXIBLE ······················································ 4-15 4-4. Mounted Parts Location ················································ 4-18 REPAIR PARTS LIST 5-2. Electrical Parts List ························································· 5-2 DSC-W1/W12_L3 — 2 —...
JK-289 LCD panel SONY *1: For SONY type, refer to the SERVICEMANUAL, LEVEL 2 and LEVEL 3. *2: For AUO type, refer to the SERVICE MANUAL, LEVEL 2 SUPPLEMENT-6 and LEVEL 3 SUPPLEMENT-3. Checking method: Refer to “SECTION 2 DISASSEMBLY” to remove the rear cabinet assy.
MS-259 FLEXIBLE BOARD (CONNECTOR) (CONNECTOR) JK-289 BOARD JK-289 BOARD (JACK) (JACK) MS-276 BOARD (2/2) MS-276 BOARD (2/2) (LCD DRIVE) (LCD DRIVE) SP-045 FLEXIBLE BOARD SP-045 FLEXIBLE BOARD (SPEAKER) (SPEAKER) COMMON NOTE FOR SCHEMATIC DIAGRAMS COMMON NOTE FOR SCHEMATIC DIAGRAMS DSC-W1/W12_L3...
Page 37
The components identified by mark 0 or Note : 0 sont critiques pour la sécurité. dotted line with mark 0 are critical for safety. Ne les remplacer que par une pièce portant Replace only with part number specified. le numéro spécifie. DSC-W1/W12_L3...
Les composants identifiés par une marque 0 sont line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified. par une piéce portant le numéro spécifié. DSC-W1/W12_L3 JK-289, SP-045, MS-259, MS-276 (1/2)
Les composants identifiés par une marque 0 sont line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified. par une piéce portant le numéro spécifié. DSC-W1/W12_L3 MS-276 (2/2)
Page 41
SP-045 FLEXIBLE BOARD MS-259 FLEXIBLE BOARD COMMON NOTE FOR PRINTED WIRING BOARDS MOUNTED PARTS LOCATION COMMON NOTE FOR PRINTED WIRING BOARDS MOUNTED PARTS LOCATION Board Name Function JK-289 JACK SP-045 FLEXIBLE SPEAKER MS-276 LCD DRIVE, MS CONNECTOR MS-259 FLEXIBLE CONNECTOR DSC-W1/W12_L3...
Note: JK-289 board, J101 and J102 are included in MS-259 flexible complete board. LND007 LND006 L L L SP-045 FLEXIBLE BOARD Note: SP-045 flexible board and SP901 are included in MS-259 flexible complete board. LND009 LND008 SP901 >PI< SP-045 1-862-488- DSC-W1/W12_L3 JK-289, SP-045 4-11 4-12...
Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. DSC-W1/W12_L3 Replace only with part num- Ne les remplacer que par une pièce ber specified. portant le numéro spécifié.
Page 49
[Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)] Toolbar Printing a text Reversing the screens displayed once • To reverse the previous screens (operation) one by one, click 1. Click the Print button 2.
Page 50
Reverse 987673615.pdf Revision History S.M. Rev. Ver. Date History Contents issued 2004.04 Official Release — — • Addition of Argentine Model (W1) 2004.08 Supplement-1 • Addition of E, Korea and Chinese Models (S1 PV04-011) (W12) • Addition of LCD Type (AUO TYPE) 2004.10 Supplement-2 (S2 PV04-020)
Need help?
Do you have a question about the DSC-W1 and is the answer not in the manual?
Questions and answers