Table of Contents
Advertisement
Playback
6
Editing
You can combine the relayed scene in the built-in memory and the continued scene in the SD
card to be one into the SD card.
Relay recorded scene
A Built-in memory
B SD card
C Range of relay recording
≥ Change the mode to
1
Insert the SD card that was used
for relay recording.
2
Select the menu. (l 27)
[COPY] # [RELAY SCENE COMBINE] #
[YES]
3
When the confirmation message
appears, touch [YES].
≥ Combine the relayed scenes into a SD card.
≥ Scene in the built-in memory will be deleted.
4
Touch [EXIT] when the relay scene
combining complete message is
displayed.
≥ The thumbnail view of the SD card is indicated.
≥ Relay recording information will be deleted
when the relay scenes are combined, and
relay recording will be possible again.
90
VQT2B34
Relay scene combining
[HDC-TM20]
.
Relay scene combining
≥ When the relayed scenes in the built-in
memory or SD card are deleted, combining of
the relayed scenes will not be possible.
To cancel relay information
[COPY] # [RELAY INFO CANCEL] # [YES]
≥ When the relay information is cancelled,
combining of the relayed scenes will not be
possible anymore.
≥ When the confirmation message appears,
touch [YES].
Combining of the relay scene cannot be
performed if the available space on the SD
card is less than the volume of the relayed
scene in the built-in memory. It is
recommended to combine the relay scene
using a DVD burner or the HD Writer AE 1.0.
Advertisement
Table of Contents
