Advertisement
IPS Installation Wizard
Regional Settings
The Administrar or Technician doing the initial setup of the Printer will need to go through the Installation
Wizard upon first boot of the system. This will walk them through the proper setup procedures of the IPS
to ensure that this unit is installed correctly and make it ready to print.
The First Step is to set the Regional settings.
Select the Regional Setting Icon to begin.
Note: Step 2 etc. cannot be done until Step one is completed.
This information is solely for use of Personnel and Authorized Dealers. No part of this publication may be copied, reproduced or
distributed in any form without express written permission from.
2011.
- 2 -
Advertisement
