Trusted Platform Module (Optional); Location Of The Standby Power Indicator Led - Intel BOXD945PVSLKR Technical Product Specification

Product specification
Table of Contents

Advertisement

Intel Desktop Board D945PVS Technical Product Specification
1.12.2.9
WAKE# Signal Wake-up Support
When the WAKE# signal on the PCI Express bus is asserted, the computer wakes from an ACPI
S1, S3, S4, or S5 state.
1.12.2.10
+5 V Standby Power Indicator LED
The +5 V standby power indicator LED shows that power is still present even when the computer
appears to be off. Figure 13 shows the location of the standby power indicator LED.
CAUTION
If AC power has been switched off and the standby power indicator is still lit, disconnect the power
cord before installing or removing any devices connected to the board. Failure to do so could
damage the board and any attached devices.

1.13 Trusted Platform Module (Optional)

The optional Trusted Platform Module (TPM) is a component on the desktop board that is
specifically designed to enhance platform security above-and-beyond the capabilities of today's
software by providing a protected space for key operations and other security critical tasks. Using
both hardware and software, the TPM protects encryption and signature keys at their most
vulnerable stages—operations when the keys are being used unencrypted in plain-text form. The
TPM is specifically designed to shield unencrypted keys and platform authentication information
from software-based attacks.
For information about
TPM
36
Figure 13. Location of the Standby Power Indicator LED
CR3J1
OM17827
Refer to
http://www.intel.com/design/motherbd/vs/

Advertisement

Table of Contents
loading

This manual is also suitable for:

D945pvs

Table of Contents