Table of Contents
Advertisement
4. BIOS SETUP
Other options for "Type:" are:
[CD-ROM] - for IDE CD-ROM drives
[LS-120] - for LS-120 compatible floppy disk drives
[ZIP-100] - for ZIP-100 compatible disk drives
[MO] - for IDE magneto optical disk drives
[Other ATAPI Device] - for IDE devices not listed here
After using the legend keys to make your selections on this sub-menu, press the [Esc]
key to exit back to the Main menu. When the Main menu appears, you will notice that
the drive size appear in the field for the hard disk drive that you just configured.
Language [English]
This allows selection of the BIOS' displayed language. Currently only English
is available.
Supervisor Password [Disabled] / User Password [Disabled]
This field allows you to set the password. To set the password, highlight the appro-
priate field and press <Enter>.
Type in a password and press <Enter>. You can type up to eight alphanumeric char-
acters. Symbols and other keys are ignored. To confirm the password, type the pass-
word again and press the <Enter>. The password is now set to [Enabled]. This pass-
word allows full access to the BIOS Setup menus.
To clear the password, highlight this field and press <Enter>. The same dialog box
as above will appear. Press <Enter> and the password will be set to [Disabled].
A Note about Passwords
The BIOS Setup program allows you to specify passwords in the Main menu. The
passwords control access to the BIOS and certain Security menu options during
system startup. The passwords are not case sensitive. In other words, it makes no
difference whether you enter a password using upper or lowercase letters.
The BIOS Setup program allows you to specify two separate passwords: a Supervisor
password and a User password. When disabled, anyone may access all BIOS Setup
program functions. When enabled, the Supervisor password is required for entering
the BIOS Setup program and having full access to all Security menu options.
42
ASUS MES-VM User's Manual
Advertisement
Table of Contents
