Asus MES User Manual page 60

4. BIOS SETUP
USB IRQ [Enabled]
[Auto] reserved an IRQ# for the USB to work. [NA] does not allow the
USB to have an IRQ# and therefore prevents the USB from functioning. If
you are not using any USB devices, you may set this feature to [NA] to save
an extra IRQ# for expansion cards. Configuration options: [Auto] [NA] [3]
[4] [5] [7] [9] [10] [11] [12] [14] [15]
ONB VGA BIOS First [No]
This field, when set to [Yes], gives priority to the onboard VGA BIOS over
other VGA controllers. Configuration options: [No] [Yes]
PCI/PNP ISA IRQ Resource Exclusion
IRQ XX Used By ISA [No/ICU]
These fields indicate whether or not the displayed IRQ for each field is
being used by a legacy (non-PnP) ISA card. The default value indicates
either that the displayed IRQ is not used or an ISA Configuration Utility
(ICU) is being used to determine if an ISA card is using that IRQ. If you
install a legacy ISA card that requires a unique IRQ, and you are not using
an ICU, you must set the field for that IRQ to [Yes]. For example: If you
install a legacy ISA card that requires IRQ 10, then set IRQ10 Used By
ISA to [Yes]. Configuration options: [No/ICU] [Yes]
60 ASUS MES User's Manual